home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Latest Shareware Programs: Warp
/
OS-2 WARP - Latest Shareware Programs.iso
/
zipped.os2
/
repcom
/
easyset.lzh
/
EASYSET.DOC
< prev
Wrap
Text File
|
1994-04-13
|
6KB
|
92 lines
╔═══════════════════════════════════════════════════╗
║ ║
║ EN2K Ethernet Network Adapters ║
║ (C) Copyright PDS, 1994. All Rights Reserved. ║
║ Release Date : January 17, 1994 ║
║ (940117) ║
║ ║
╚═══════════════════════════════════════════════════╝
Additional information for EasySet v1.00
----------------------------------------
This file describes some minor changes to the EasySet Utility which
were not covered in the manuals. Please refer to the manuals on how to
use EasySet.
Some minor changes not listed in manuals:
1. In each screen, apart from th original '>' cursor, the item selected will
also be highlighted for easier reading
2. Wordings of 'UP/DOWN arrows...' are replaced by ' or arrows ...'
3. Boot PROM address base options now also include 'C4000 8/16KB' and
'C0000 32KB'. This two options only supports EN2K adapters used with
XT machines. An asterisk is put after each of these two options to
indicate this. Ignore this two asterisks if you are using XT machines.
4. An additional screen is added after choosing 'SAVE' to prevent accidental
programming of the configuration registers. Please choose 'CANCEL' to
cancel save or 'CONFIRM' to confirm programming of registers:
╔══════════════════════════════════════════════════════════════════════════════╗
║ EasySet Configuration Program v1.00 (940120) ║
╚══════════════════════════════════════════════════════════════════════════════╝
╔══════════════════════════════════════════════════════════════════════════════╗
║ ║
║ Card 1 : ║
║ ║
║ Ethernet Address : 00 80 48 80 00 11 ║
║ ║
║ I/O Base : 300h ║
║ ║
║ IRQ : 10 ║
║ ╔════════════════╗ ║
║ Cable Type : BNC ║ ║ ║
║ ║ CONFIRM ║ ║
║ PROM : Base=C8000h & Size=32KB ║ ║ ║
║ ║ > CANCEL ║ ║
║ Link Integrity : Enabled ║ ║ ║
║ ╚════════════════╝ ║
║ Late IO-16 : Disabled ║
║ ╔═════════╗ ╔═════════╗ ║
║ Early CHRDY : Disabled ║> SAVE <║ ║ DISCARD ║ ║
║ ╚═════════╝ ╚═════════╝ ║
╚═════╡ ENTER to choose ╞═══════════════════════╡ UP/DOWN arrow to select ╞════╝
Copyright (C) 1994 by PDS. All rights reserved.
5. Another screen would come up after successful re-programming of registers
and before leaving the greeting manual of this configuration program as
follows to remind the user to reboot the system:
╔══════════════════════════════════════════════════════════════════════════════╗
║ EasySet Configuration Program v1.00 (940120) ║
╚══════════════════════════════════════════════════════════════════════════════╝
╔══════════════════════════════════════════════════════════════════════════════╗
║ ║
║ The program has detected 2 EN2K Ethernet network adapters. ║
║ ║
║ > Card 1 - I/O base:300h, IRQ:10, Media:BNC, PROM:Base=C8000h & Size=32KB ║
║ ╔══════════════════════════════════════════╗ ║
║ Card 2 - I/O b║ ║h & Size=8/16KB ║
║ ║ EEPROM configurations have been changed. ║ ║
║ ║ ║ ║
║ ║ Please reboot your system. ║ ║
║ ║ ║ ║
║ ║ Press any key to continue... ║ ║
║ ║ ║ ║
║ ╚══════════════════════════════════════════╝ ║
║ ║
║ ║
║ ║
║ ║
║ ║
║ ║
╚═════╡ ENTER to choose ╞════╡ ESC to exit ╞════╡ UP/DOWN arrow to select ╞════╝
Copyright (C) 1994 by PDS. All rights reserved.
System reboot is recommended by power off and on the power supply or press
the RESET button. Pressing CTRL-ALT-DEL to reboot the system at here is
not recommended.